This morning when I woke up, I receive an email from my counterpart regarding Cisco UCS R-Series. At first, I I thought it was just another model of blade or rack mount system Cisco had added to their product line. Once I open up the official link and found that is nothing related to the blade or rack mount base UCS machines. Is a RACK!!!! after years of Cisco UCS come into the market, there had been number of users asking why Cisco UCS does not come with their own rack? Finally, I think Cisco has the answer to the customers who had asked the similar question before. Not a bad idea to add the R series as part of the offering, which may looks cool to deploy the full set of UCS & Cisco solutions in Cisco Rack itself now.
Read more information from the official link here
Read more »
We were doing some stress test with more than 15 VMs on a single B250M2 Cisco UCS blade machine with 2 x Intel 6 Cores 2.93Ghz, and 192GB memory. While are stress test are pretty simple, each VM been provisioned with 2 vCpu and 4GB of physical memory. We maximize the CPU load of all the virtual machine and end up I was able to capture the print screen as attach here.
Read more »
I was busy setup the demo solution for the Cisco summit yesterday. The Demo we had were displaying the VMware, Cisco UCS, Nexus 5000, MDS 9124 & Netapp Storage Solution. 1 of the Surprise thing happened during the setup, which the power source for our MDS 9124 had been tripped during the installation yesterday. In this scenerio, all our connection to ESX host and VM were disconnected. It took us for 25 mins to recovered the power failure and the MDS Switch was back on line after that. I was thought to reboot all the ESX host as we are performing BOOT FROM SAN for all the ESX hosts that we setup. Surprise happened here, which I found all the ESX host were still continue running. I did the command uptime and check the system uptime from vcenter, it showed that the ESX host were not rebooted during the SAN connection drop from UCS to our Netapp FAS storage.
I further checked the virtual machines been power on in the ESX servers, which show all the VM were continue running without system crash or rebooted. Now I realize that the failure on SAN switch may not necessary result system crash or hung, in fact it may allow you resume the system state once the SAN switch are back online, of course, this is no guarantee assumption, just some surprise finding experienced yesterday would like to share here. Read more »
Recently I had deployed quite a number of EMC SAN with MDS Switches and Cisco UCS, I found tha FC SAN zoning might be a key consideration we may need to take a look for every deployment. This post will more focus on the MDS and UCS 6120 FC Uplink.
Cisco UCS interconnect fabric switches are utilizing FC uplink to allow the Cisco Unified Computing System to get access to the SAN fabric environment.
Here is the architecture diagram you can refer to. In order to make this work, 1st requirement will be the NPIV.
Read more »
I manage to capture some screen shot to share over the Cisco UCS platform running with VMware vSphere 4
Summary tab it shows Cisco as the product manufacturer.
Read more »
